How to clean your laptop screen without leaving your screen behind
The first thing you’ll need to do if you want to clean a laptop screen is to replace the whole keyboard and mouse assembly.
After that, you’ll want to remove the plastic back panel and the bottom plate.
This is where you’ll be replacing the entire keyboard and mice assembly.
The key to this process is to be sure to replace all of the components in the front panel.
The bottom plate and keyboard are particularly hard to replace, so you’ll probably need to remove all of them, remove the motherboard, and then replace it.
The top and back of the keyboard and the keyboard/mouse assembly are relatively easy to remove and replace.
You’ll need the motherboard and motherboard tray, and the power supply.
You might need to make sure the screws holding the motherboard tray in place are firmly seated, and to loosen them slightly.
The power supply is also likely to be replaced.
Once you’ve replaced the motherboard you’ll also want to replace any power supply connections.
If you’re replacing the motherboard the power connector is probably a good place to start.
You’ll want the back of each laptop, too, as it holds the power cord, keyboard, and mouse.
If there are any screws holding your keyboard/mice assembly together you’ll have to remove them.
Once you’ve removed all of your components, you’re left with only the motherboard.
If the motherboard is still attached you can use a small flathead screwdriver to gently pry the back plate from the motherboard with a pair of pliers.
You should be able to see the plastic panel that holds the motherboard in place.
Remove it carefully.
This should allow you to remove any screws that are still attached.
Once the back is removed, you can gently pierce the plastic with a small screwdriver and remove the back.
The motherboard can then be removed with the screws that hold it in place, which will open the motherboard up.
The front panel of the laptop should also come off easily.
If not, you might want to try using a small piece of tape or a file to get it off.
You can use the same process for the bottom of the computer and the mouse.
Again, it’s important to be careful as the motherboard should come off fairly easily.
The back of your keyboard and your mouse are likely to come off in a similar fashion.